- With Combination Bulkhead/Flat Surface Mounting Base
- GoPro® compatible
- Compatible with both spinning and casting rods
- specifically designed for rugged environments and large fishing rods
- features a rotating ring to keep your rod in place when traveling
- Hexagonal attachment point compatible with the C-Size and B-Size hex ball base

- The fastest rod release of any holder on the market
- With one quick motion, your fishing rod is lifted straight out into the fish fighting position
- Fibre reinforced engineering grade nylon offers strength, resilience and reliability
- Includes 241L Combination Side/Deck Mount

- Allows mounting on a flat surface or on the side of a gunnel or transom
- For all Scotty post mount rod holders
- Simply choose the best direction to fish from and insert the rod holder

- Holds a baitcaster reel in a cushioned cradle
- Slot at the front also allows for a spinning reel to be securely held in position
- Designed with a side mounted flange
- Pistol grip rod butts easily clear the sides of the rod holder
- Rods can safely be secured with a soft latching strap
- Manufactured with fibre reinforced engineering grade nylon

- Holds a baitcaster reel in a cushioned cradle
- Slot at the front also allows for a spinning reel to be securely held in position
- Designed with a side mounted flange
- Pistol grip rod butts easily clear the sides of the rod holder
- Rods can safely be secured with a soft latching strap
- Manufactured with fibre reinforced engineering grade nylon
- Includes 449 Clamp Mount making this a fully portable
- The 389 includes the stainless steel fasteners required to mount the rod holder to the clamp mount

- Featuring the new Quick Release system (QR)
- Easily switch between 2 or 3 rod buzzer bars and single sticks.
- 16mm Black Anodized Aluminium construction
- Power Point banksticks feature new Auger point
- The Power Point T-Bar is stored in the end of the bankstick inner
- Auger point should be screwed into the ground using the T-bar
- Inner part needs to be removed to allow the T-bar to be inserted into the outer stick
- User will never loose the T-bar or have to walk back to the bivvy to search for it
- QR banksticks should not be forced into the ground using a buzz bar.
- Without the need to use spacing washers that can loosen or compress over time.

- Secure grip on your rods during the most ferocious of bites
- Minimalist design
- Two sizes for shrink finish (small) and full Duplon/cork sticks (large)
- Sold in a pack of three
- Specifications
- Small - (H)2.5cm (Wire not included) - Weight 4g

-Securely grip your rods through the most savage of takes
-Minimalist design
-Two sizes cater for abbreviated (small) and full duplon/cork handles (large)
-Dimensions: 2.5 (H) cm (Small) / 3 (H) cm (Large) (not including thread)
-Weight: Approx 4g (Small) / 5g (Large)
-Material: Plastic

- Simple and secure solution for keeping your rod sections together during storage or transport.
- The extra elastic loop is great for securing reel handle and rotor in place.
- The elastic loop at one end locates over a rod ring and will allow you to wrap each section individually for better protection.
- Supplied in a pack of two

- Strong, lightweight double frame construction
- Adjustable height, adjustable length
- 3-rod buzzerbars included
- Packed in a carrying bag

- Holds 2 made up rods and big pit reels
- Ideal for transporting spod and marker rods
- Side pocket for Marker/Wrapping sticks
- Includes Marker Stick Measuring Strap
- Padded shoulder strap
- Large side pocket for Impact Spods and Spombs™
- Heavy duty zips
- 100% polyester

- Non-slip rubber internal section
- Heavy duty plastic outer section
- Stainless steel screw
- Suitable for any rod diameters
- 1 rod rest provided per pack

- 3D CAD designed and engineered in the UK
- Square base with isotope slot
- Adjustable hinging parts to control grip level
- Adjustment grip level with Allen key
- Changeable inlays in 3 sizes
- Medium can hold 14,15,16 mm carp rods
- Large can hold 17,18,19 mm carp rods
- 7 different colour inlays
- Industry first adjustable rod rest for 100% grip
- Perfect rod grip for conventional up to extreme snag fishing
- The most powerful rod rest ever designed

Korum Sidestrike Rest: Steep-sided to hold rods against the wind, with a deep line groove so free spool mechanisms can still be used.

- Suitable for cork, duplon and abbreviated rod butts
- Soft rubber flexes to suit all rods
- Suitable for all types of rod butt
- Flexible rest moulds around your rod
- Brass screw thread
- Rubber O ring for fine adjustment

- Perfect for a wide range of angling disciplines
- Unique one-touch Angle Tilt design
- Isotope slot

- Stretchy neoprene for the correct rod retention
- Multi-position Velcro closure
- Two straps in a pack
- Dimensions: 26cm x 8cm / 15cm x 5cm

- Protective neoprene construction
- Line safe wave-lock rubber grommet
- Large enough for most spods and other castable baiting aids
- Will house most castable feature finding aidsmarker float set-ups etc
- Velcro ring and rod attachment
- Capacity: 250mm long x 60mm wide

- Perfect for a wide range of angling disciplines
- Unique one-touch Angle Tilt design
- Isotope slot

- Loose Support
- High reaching snag-arms
- Solid support for the rod
- Features a unique one-touch angle tilt design
- Swivel mechanism
- Suitable for strong fish with powerful bites

- Ideal for using with a pole sock or tulip rest
- Features quick release main knuckle
- Quick threaded insert
- Smooth high-density EVA foam
- Fits 25mm, 30mm and 36mm round legs
- Short Dimensions: 28cm

- 6 Kit Roost capable of holding 6 top kits
- Hex shaped EVA foam
- Designed to prevent kits from lifting out in the wind
- Features a single 3D-R quick release knuckle
- Multiple fitting options
- Can be used for top kits or spare pole sections
- Fits 25mm, 30mm and 36mm round legs
- 6 Kit Roost Length 36cm

- Perfect for using with bait waiters and pole socks
- Features quick release main knuckle
- Quick threaded insert
- Lightweight matt aluminium extrusions
- Fits 25mm, 30mm and 36mm round legs
- Short Dimensions: 18cm
- Medium Dimensions: 28cm
- Long Dimensions: 43cm

- Designed to hold a single rod
- Robust multi angle lock for rod position adjustability
- Fixed main knuckle for added strength
- Soft TPR moulded insert to protect and grip rod butt
- Fits 25mm, 30mm and 36mm round legs

- Designed to grip the rod tightly eliminating the danger of slippage during a take
- Constructed from a flexible nylon, with a soft touch rubber inlay
- The Duo-Grip will accommodate both full cork and Duplon handles in the upper area of the Grip
- Featuring a betalight slot and stainless steel thread.

- Ideal for storing up to 3 rods whilst fishing
- Preston have spent a long-time testing and developing the Support
- The strongest and most user-friendly rod support
- Compact design that doesn't take up too much room
- Perfect size to store in Preston's Accessory bags
- Unique OffBox 36 angled teeth versatility gives you different angles
- Support your rods easily and securely on any bank
- Can house pole top kits perfectly too
- Incredibly versatile and multi-functional support
- You can attach it to the leg of your seatbox or platform
- Simply adjust the angle, leaving spare rods close to hand at all times
- Inserts Supplied23mm OffBox, 25mm Round, 30mm Round

- ABS plastic
- Deep slotted grooves
- Extended angled ears
- Standard thread

- Excellent for coarse, predator or game bait anglers looking to hold their rods securely.
- Keep your rods in the correct position whilst allowing the fish to run freely without damaging your main line.
- Perfectly measured screw in fitting allowing you to use it with any standard bankstick or tripod.
- Available in one size only.
- One head per pack.
- Standard screw fit.

- Ideal for using with longer rods on large lakes or rivers
- Designed to offer maximum stability
- Extending inner extrusion with camlock mechanism
- Features quick release threaded insert
- Robust multi angle lock for rod position adjustability
- Double knuckle fixing points with cross brace to offer upmost strength
- Lightweight matt aluminium extrusions
- Fits 25mm, 30mm and 36mm round legs
- Dimensions – min 800mm / max 1300mm

- Single padded sleeve to accommodate a fully made-up rod
- 10mm heavy-duty zip with double zip pullers
- Internal padding to protect the rod/reel in transit
- Small Zipped lead pocket on the side
- D-clips allow a padded shoulder strap to be attached
- Material: 600D Polyester
- Dimensions: 12ft 200cm L

- Tough pliable nylon construction
- Non-slip rubber outer coating
- Suitable for all rod diameters
- Three size options: M-17mm, L-21mm

- Durable/Water resistant fabric
- Padded and Lined for maximum protection
- Hard-wearing heavy-duty elastic
- Design for rods between 10ft – 13ft
- Can be used alongside Compac Rod Holdall/Sleeves

- The perfect compact butt rest
- Ideal for use with both cork and EVA rod butts
- Manufactured in a super soft rubber compound
- Aids in gripping the butt of the rod slightly
- Allows you to angle the butt of the rod in any direction
- No need to worry about the rod sliding