- Outer shell 100% nylon, 230T taslon 
- 5000/5000 waterproof/breathable
- Fully taped seams 
- Lightweight shell design 
- Storm flap main zip 
- Rubberised badge detail 
- Adjustable hood

- Compact 42” net that packs down to only 30inches (76cm) length
- Unique telescopic 42” Arms
- Perfect for use with both our 6ft and 8ft recon rods
- Updated super stiff handle can be used at three lengths 75cm 145cm and 195cm
- Super strong forged aluminium landing net spreader block
- Skeleton design to ensure correct arm insertion
- Stainless steel stud with standard 3/8 thread
- Pointed Anti-twist butt cap
- 3pc (2pc-Tele)1.95m max handle length
- Stiff carbon handle and net arms
- Free-flowing hexmesh sides
- 95cm depth with super soft mesh base
- Reinforced mesh stitching
- (T30) Transport length 30 inches (76cm)

- Fully adjustable
- Very adaptable bobbin indicator system
- Supplied with two different length Opti-curve chains
- Colour coordinated line clip
- Adjustable and very line friendly
- Various colors available

- Slim, lightweight sleek black armoured carbon blank
- Classic styled full cork handle
- Progressive casting action with superfast tip recovery
- Super-light M-SERIES DL black guides and anti-frap tip
- Hard wearing Anti-frap ceramic tip ring
- 40mm guide pattern on 12ft 2.75lb and below
- 50mm guide pattern on 12ft 3.00lb and above
- Fold friendly ringing pattern
- 17mm black DPS reel seat to house all big pit reels
- Line friendly custom contoured Sonik clip
- Black anodised butt cap laser etched with ‘S’ logo

- High strength carbon composite body and rotor
- Super-slow oscillation for perfect line lay
- Quick-Torque drag system
- Supplied with spare CNC machined
- Anodised aluminium spool
- QUIK-CLIK™ folding handle with wood grip
- 14+1 Stainless shielded bearings
- Twin spring-loaded line clips
- Dual strength stainless steel main shaft
- Open bail rotor lock
- Oversized twist free line roller
- Floating rotor line guard
- 8000
- Gear Ratio: 4.9:1
- Weight: 665g
- Spool Capacities
- 0.30mm/360m – 0.35mm/260m – 0.40mm/210m
- 0.32mm/500m – 0.35mm/410m – 0.40mm/330m
- 10000
- Gear Ratio: 4.9:1
- Weight: 725g
- Spool Capacities
- 0.30mm/430m – 0.35mm/330m – 0.40mm/270m
- 0.32mm/580m – 0.35mm/490m – 0.40mm/390m

- Simple but effective gas cannister cover
- Helps insulate in cold conditions
- Addition insulation in base
- Handy side pocket for lighter and spoon
- Hardwearing and water resistant 600D fabric
- Zipped HD waterproof base material
- Designed to fit 450G gas canisters
- Dimensions: D12 H13CM

- Small sling bag for valuables and essentials
- Can be worn on either right or left shoulder
- Three zipped compartments
- Adjustable length padded shoulder strap
- Expandable side water bottle pocket
- Internal key security clip
- HD 600D PVC backed Bank-Tek camo material 

- Two-piece handle for easy transportation
- Slim and stiff two-piece carbon handle and net arms
- Reinforced carbon composite spreader block with net mesh retainer
- Medium depth fishing net mesh for maximum versatility (1.10m)
- Easy flow deep green hex mesh
- Anodised and laser etched butt cap
- Supplied in drawstring case

- Digital scale
- Maximum weight: 50kg (110lb)
- Accuracy: 10g
- Large backlit LCD display
- Compact design
- Simple Tare weight function
- Function for holding the heaviest weight
- Automatic power off after 60 seconds
- Temperature function
- Requires 2 x AAA batteries (not included)

- Lightweight aluminium construction with hard anodised finish
- Large 1ltr capacity perfect for a one- or two-person brew
- Robust spring-up stainless-steel handle
- Large lid allows for storage of essentials inside the kettle
- Nylon drawstring carry bag included
- Material: Aluminium
- Capacity: 1.0ltr
- Dimensions: 150 x 85 mm
- Weight: 170g

- Robust super-stable four-leg folding design
- Infinite height adjustable legs for perfect levelling
- Heat-Kontrol burner technology for wide range of cooking temperatures
- Low-Flow gas ports for stable flame at lower heat settings
- Windscreen burner construction
- Pre-heat coil for efficient gas combustion
- Self-levelling rubberised anti-slip feet
- Piezo ignition, no lighter required
- Tough stainless-steel construction
- Extended length stainless steel braided hose
- Dual seal main gas connector for ultimate reliability
- Includes nylon storage bag
- Suitable for use with EN417 ISO screw thread butane/propane canisters
- Power 2800W

- Custom made sea rigs
- Hand tied to perfection
- Carefully tailored to suit specific species, baits &conditions
- Single hook unclipped rig
- Suitable for a variety of species when fishing at short/medium range
- Ideal for Cod, Coalfish, Whiting, Dogfish, Bass etc

- Sized to fit standard large dial scales
- Internal accessory pocket for carp care items
- Lined and padded for extra protection
- Hardwearing and water resistant 600D fabric
- Oversized No.10 zips with easy grab pullers
- Dimensions: W20 D6 H30CM

- Lightweight and foldable for easy transport and storage
- Opens and folds securely with one hand for quick, efficient use
- Knotless, rubber-coated 20mm hexamesh: fish-friendly and tangle-free
- EVA handle with printed measuring scale for grip and convenience
- Ideal for stalking predators in tight swims, urban areas, or small boats

- Simple and secure solution for keeping your rod sections together during storage or transport.
- The extra elastic loop is great for securing reel handle and rotor in place.
- The elastic loop at one end locates over a rod ring and will allow you to wrap each section individually for better protection.
- Supplied in a pack of two

- Sized to fit folding digital scales
- Internal accessory pocket for carp care items
- Lined and padded for extra protection
- Hardwearing and water resistant 600D fabric
- Oversized No.10 zips with easy grab pullers Dimensions: W11 D4 H18CM

- Simple but effective gas cannister cover
- Helps insulate in cold conditions
- Addition insulation in base
- Handy side pocket for lighter and spoon
- Hardwearing and water resistant 600D fabric
- Zipped HD waterproof base material
- Designed to fit 450G gas canisters
- Dimensions: D12 H13CM

- Sized to fit folding digital scales
- Internal accessory pocket for carp care items
- Lined and padded for extra protection
- Hardwearing and water resistant 600D fabric
- Slick coil zipper
- Dimensions: W11 D4 H18cm

- Gear ratio – 5.2:1
- Designed for commercial waggler/feeder fishing
- Lightweight graphite body
- Oversize bail arm and balanced rotor
- Multi-disc front drag
- Supplied with standard and shallow aluminium spools
- Compact CNC handle with right/left exchange

- New rigid aluminium frame
- High back with padded fleece pillow
- Eight-position recliner mechanism
- Heavy-duty 600D and fleece fabric
- Four fully adjustable legs
- Comfortable arm rests

- Versatile tackle pouch ideal for storing your PVA accessories
- Top grab handle
- Zipped pocket in lid
- Size 10 zips with easy grab pullers
- Hardwearing and water resistant 600D fabric
- HD Waterproof base material
- W25 D15 H16CM

- Two removable dividers and zipped pocket in lid.
- Topside grab handle for easy access and storage
- HD Waterproof base material
- Hardwearing and water resistant 600D fabric
- Size 10 zips with easy grab pullers
- W20 D15 H8CM
- HD 600D PVC backed SK-TEK Camo material
- Rigid padded design
- Clear PVC lid
- HD waterproof base
- Side and top grab handles

- High quality sinking braided main line
- Designed for feeder fishing
- 8-strand round braided precision diameter
- Superb knot strength
- No stretch for maximum bite registration
- Abrasion resistant smooth coating
- Available in 0.08mm, 0.10mm, 0.12mm
- Supplied on 150-meter spools

- Gear ratio 4.7:1
- Wormshaft oscillation system
- Shallow aluminium long-cast spool
- High strength graphite body and rotor construction
- Floating rotor line-guard system
- Twin spring-loaded round metal line-clips
- Multi-washer micro adjustable front drag}
- Sealed one-way clutch system
- Quick-torque drag system
- Strong main shaft
- Zinc alloy drive gear
- Precision machined brass pinion gear
- Large diameter aluminium bail wire
- Tapered bail arm holder
- Twist-free line roller
- Ambidextrous aluminium CNC handle featuring a wooden handle grip